Offices Nationwide 

Bristol - Air Testing - 0117 212 0189

The office that covers this area is: Cardiff

Phone Number: 0117 212 0189 Email: bristol@e2consultants.co.uk

How Many Properties Need An Air Tightness Test?

If you have 4 or less properties of the same type then only one test needs to be undertaken per type. If you have more than 4 but less than 40 dwellings of a type then you need at least two tests to be done on each type. Finally, if there are more than 40 properties of a particular type then at least 5% of each type needs to be tested UNLESS the first 5 get a passing score - then this can be dropped to just 2%.

What Air Permeability Rating Do I Need?

A passing score in Bristol is 10 m³/(h.m²) for an air permeability rating which resembles the amount of uncontrolled air that's leaking from the dwelling. Should the test fail, our air tightness team will help you identify where the leakages are happening in the hope that a passing score will be achieved after a re-test.

What Does An Air Leakage Test Involve?

Employees can still do their job inside a commercial building in Bristol, within reason, though may feel some discomfort due to the noise of the fan and the draught that will be felt throughout the building. There should be no outside access once the test has begun - which lasts for approximately 90 minutes, so plan accordingly.

During an air test in Bristol the pressure of the room will be tested and as such all windows and doors that lead outside must be securely closed to avoid them swinging open and the test being abandoned. Similarly, all internal doors should be wedged open to avoid being slammed shut. Furniture will not be affected during the test, but smaller items such as paper must be held down or removed completely so they're not blown about.

An air test involves placing a large fan, or several fans, to an opening within the property; usually a doorway. The fans will increase and decrease in speed that will in-turn change the building's air pressure and record the results. Please note: an air test cannot be carried out if wind speed is more than 13mph. 3 metres per second is the ideal wind speed when undertaking an air test in Bristol.

When Should The Test Take Place?

For obvious reasons, an air pressure test is generally one of the last surveys to be undertaken once all the walls, windows, doors etc. are complete and sealed to stop any air escaping and prevent drafts through the property. The building envelope will also need to be completed.

Do I Need An Air Leakage Test?

Part L of the Government building regulations explains that on a large plot of new houses that are built to a similar specification, only a sample of the houses will need to be air tested.

We offer air leakage testing throughout Bristol where our experienced assessors will be happy to offer advice on the best ways to gain your air permeability rating. Planning your test in advance will help us determine how many tests you'll need ahead of time per property.

Domestic properties and commercial buildings over a certain size must have a passing air leakage certificate before the property can be handed over following a sale. All new buildings in England and Wales have had this requirement since 2006 and in Scotland this has been mandatory since 2010.

For further Air Testing information for your area, be sure to check out Air-Testing-Bristol.co.uk.

Our other services include:
Part E, Part F Ventilation Testing, Environmental Noise, Thermography, SAP Extension Calculations, Sustainability Statements, Part G - Water Calculations, Acoustic Testing, SAP Conversion Calculations, Code 4 Sustainable Homes, Energy Statements, SAP Calculations (TER/DER), On Construction EPC,

Air Testing can also be known as:
Domestic Air Integrity Testing, Domestic Air Pressure Testing, Fan Pressure Testing, Domestic House Leakage Testing, Air Tightness Testing, Domestic Fan Pressure Testing, Domestic Air Testing, Domestic Air Tightness Testing, Air Integrity Testing, Air Leakage Testing, Air Pressure Testing, House Leakage Testing, Domestic Air Leakage Testing,

E2 Specialist Consultants
July 22 at 5:05pm
One of our office-based consultants is hard at work on the SBEM calculation for a commercial new build in Bristol, Avon. You can get yourself an SBEM quote from our website: https://www.e2consultants.co.uk/Get-A-Quote/SBEM_Calculations

E2 Consultants Delivering compliance solutions for Architects & Developers    Head Office E2 HOUSE, South Park Way, Wakefield 41 Business Park, WF2 0XJ    Questions? Call: 0800 043 8100