Offices Nationwide 

Bristol - Commercial Sound Insulation Design Advice - 0117 212 0189

The office that covers this area is: Cardiff

Phone Number: 0117 212 0189 Email: bristol@e2consultants.co.uk

In Bristol, E2 Consultants can deliver Sound Insulation Testing for new or refurbished dwellings in compliance with Part E of the Building Regulation.

As part of our service in Bristol we can also offer advice on the additional requirements of Approved Document Part E including the control of reverberation in common areas and the performance of internal walls and floors.

We actively encourage clients to seek our services at the earliest opportunity as it is possible that the noise mitigation measures required in some instances, could dictate significant changes to external and internal layouts. Therefore our early involvement could remove the need for costly revisions.

Our consultants at Bristol can guide you through the process to ensure the best possible chance of achieving sound test passes. Call 0117 212 0189 or email bristol@e2consultants.co.uk

E2 Consultants in Bristol are specialists in the provision of high quality and practical acoustic consultancy to both the public and private sectors; typically working with residential and commercial developers, architects, planning consultants, industry, local planning authorities and environmental services.

Pre-Completion Testing - The following table outlines the sets of tests that are required for new and converted properties.

Property Types Test Requirements

Dwelling-houses Including bungalows

Normally, one set of tests should comprise of two individual Sound Insulation Tests (SITs)(two airborne tests):1. Living room (wall) And 2.Bedroom (wall)

Flats with separating floor but not walls

Normally, one set of tests should comprise of four individual SITs (2 x airborn, 2 x impact): 1. Living room (Airborn), 2.Living room (Impact), 3. Bedroom (airborn) and 4. Bedroom (Impact)

Flats with separating floor and walls

Normally, one set of tests should comprise of six individual SITs (4 x airborne, 2 x impact): 1. living room/living room (floor, airborne), 2. living room/living room (floor, impact), 3. bedroom/bedroom (floor, airborne), 4. bedroom/bedroom (floor, impact), 5. living room/living room (wall, airborne) and 6. bedroom/bedroom (wall, airborne)

Rooms for Residential Purposes

To conduct a set of tests, the sound insulation between the main rooms should be measured according to the principals set out above for new buildings and material change of use, but adapting them to suit the circumstances.

For further Commercial Sound Insulation Design Advice information for your area, be sure to check out Sound-Testing-Bristol.co.uk.

Our other services include:
Commercial Air Testing, BREEAM Credit Reports, Acoustic Testing, Part E / BB93, Asbestos Surveys, Workplace Noise, Display Energy Certificates, SBEM Calculations (BER/TER), Room Integrity Testing, Fire Risk Assessment, Sustainability Statements, Commercial EPCs, DSM / Thermal Modelling, Environmental Noise, Thermal,

Commercial Sound Insulation Design Advice can also be known as:
Commercial Part E Sound Insulation Testing, Part E Sound Insulation Testing, Part E Testing, Part E, Sound Insulation Design Advice, Commercial Part E Sound Testing, Part E Sound Testing, Commercial Sound Testing Part E, Sound Testing Part E, Commercial Part E Testing, Commercial Part E,

E2 Specialist Consultants
May 24 at 12:45pm
In Peterborough, Cambridgeshire is where our engineer is undertaking two full sets of sound tests. This includes four wall airborne, four floor airborne and four floor impact tests that's undoubtedly going to take most of the day.

E2 Consultants Delivering compliance solutions for Architects & Developers    Head Office E2 HOUSE, South Park Way, Wakefield 41 Business Park, WF2 0XJ    Questions? Call: 0800 043 8100