Environmental Noise Levels
The max exposure time at 85 dBA is 8 hours, at 110 dBA it's just 1 min 29 seconds. If exposed, limit the time and wear hearing protection...more
Building acoustics can help to mitigate the effects of noise disturbance which can have negative effects on your health and well-being...more
Bristol - Commercial Part E Sound Insulation Testing - 0117 212 0189
The office that covers this area is: Cardiff
E2 Consultants delivers Sound Insulation Testing for new or refurbished dwellings in compliance with Part E of the Building Regulation in Bristol and nationwide.
We actively encourage clients to seek our services at the earliest opportunity as it is possible that the noise mitigation measures required in some instances, could dictate significant changes to external and internal layouts. Therefore our early involvement could remove the need for costly revisions.
As part of our service in Bristol we can also offer advice on the additional requirements of Approved Document Part E including the control of reverberation in common areas and the performance of internal walls and floors.
Our consultants at Bristol can guide you through the process to ensure the best possible chance of achieving sound test passes.
E2 Consultants are specialists in the provision of high quality and practical acoustic consultancy to both the public and private sectors; typically working with residential and commercial developers, architects, planning consultants, industry, local planning authorities and environmental services.
Call 0117 212 0189 or email email@example.com to get a quote from one of Bristol consultants..
Pre-Completion Testing - The following table outlines the sets of tests that are required for new and converted properties.
|Property Types||Test Requirements|
Dwelling-houses Including bungalows
Normally, one set of tests should comprise of two individual Sound Insulation Tests (SITs)(two airborne tests):1. Living room (wall) And 2.Bedroom (wall)
Flats with separating floor but not walls
Normally, one set of tests should comprise of four individual SITs (2 x airborn, 2 x impact): 1. Living room (Airborn), 2.Living room (Impact), 3. Bedroom (airborn) and 4. Bedroom (Impact)
Flats with separating floor and walls
Normally, one set of tests should comprise of six individual SITs (4 x airborne, 2 x impact): 1. living room/living room (floor, airborne), 2. living room/living room (floor, impact), 3. bedroom/bedroom (floor, airborne), 4. bedroom/bedroom (floor, impact), 5. living room/living room (wall, airborne) and 6. bedroom/bedroom (wall, airborne)
Rooms for Residential Purposes
To conduct a set of tests, the sound insulation between the main rooms should be measured according to the principals set out above for new buildings and material change of use, but adapting them to suit the circumstances.
For further Commercial Part E Sound Insulation Testing information for your area, be sure to check out Sound-Testing-Bristol.co.uk.
Our other services include:
Display Energy Certificates, Environmental Noise, Commercial EPCs, Acoustic Testing, DSM / Thermal Modelling, Thermal, Room Integrity Testing, Asbestos Surveys, Commercial Air Testing, BREEAM Credit Reports, Part E / BB93, Fire Risk Assessment, Sustainability Statements, SBEM Calculations (BER/TER), Workplace Noise,
Commercial Part E Sound Insulation Testing can also be known as:
Part E Testing, Sound Testing Part E, Sound Insulation Design Advice, Commercial Part E, Part E Sound Testing, Commercial Sound Testing Part E, Commercial Part E Sound Testing, Part E, Part E Sound Insulation Testing, Commercial Part E Testing,
Copyright 2019 E2 Specialist Consultants Limited
Company No. 06728970