The loss of sound energy when sound waves come into contact with an absorbent material such as ceilings, walls, floors and other objects...more
Paths can be interrupted by insulation and blocking air paths. A material's insulation is governed by mass, stiffening and damping...more
Bristol - Air Integrity Testing - 0117 212 0189
The office that covers this area is: Cardiff
Bristol Air Integrity Testing Information
At E2 Consultants we provide air tests, air tightness tests and air pressure testing in Bristol and the surrounding areas.
We offer Air Integrity Testing throughout Bristol and surrounding areas. Our experienced Air Integrity Testing assessors will also be happy to offer advice on the best ways to gain your target rating. The number of properties to be tested should be in accordance with the following table:
Air Integrity Testing - Bristol
At E2 Consultants we offer Air Integrity Testing throughout Bristol and surrounding areas. Our experienced Air Integrity Testing assessors will also be happy to offer advice on the best ways to gain your target rating.
E2 Consultantsí accredited consultants can help you comply with EPBD Article 9 and the Energy Performance of Buildings Regulations. Our expert consultants will undertake an assessment of the efficiency of your air conditioning system, reviewing sizing / capacity and offering advice on any improvements or alternative solutions. These solutions, if implemented, can in many instances reduce costs and thus pays for the inspection in the first year.
According to Part L1a, an air pressure test needs to be undertaken on 50% of all dwelling types or three units of each type depending on which value is smaller. A block of flats is considered as a separate development and should be treated as such no matter on the number of blocks on the site. Furthermore, the testing should be done on the first batch of each type of dwelling to be completed. The need to test multiple versions of each type is to confirm the design and construction procedures are up to code according to Government regulations.
The dwellings that make up the test sample are to be chosen by the Building Control Body (BCB) as well as the pressure tester. When selecting the dwellings it should be taken into account that half of the tests for each type should be scheduled during construction of the first 25% of that type. All results, including failures, should be reported back to the BCB. Undertaking the test early in the project means any adjustments can be made before the majority of construction is complete.
Air Integrity Testing can also be known as an Envelope Test, Air Pressure Test or Air Permeability Test.
It is a requirement under the Building Regulations 2015 Part L that new dwellings in Bristol must pass an Air Integrity Testing prior to occupation; this test certificate must be produced for the dwelling to be signed off by local Bristol building control.
|Leakage Rates (m3/hr at 50Pa)|
The report has all the details required by the regulations to indicate that a valid test has been performed.
To carry out such a test with accurate results, we require some general requirements to be made available at the time of the test:
1. SAP Design air pressure test figure
2. Electricity supply
3. Water supply to enable traps to be filled
We will seal all of the intentional leakage areas in the house prior to testing. These include: fireplaces, extractor fans, exhaust fans, trickle vents and the odd uninstalled component. Everything else will have to stay 'as is' in the property.
It's strongly suggested that if you've never had a test before, that you review our air pressure / tightness pre-test checklist below.
For a quote or for more information, call our Bristol air tightness / pressure testing consultant on 0117 212 0189 or email firstname.lastname@example.org
For further Air Integrity Testing information for your area, be sure to check out Air-Testing-Bristol.co.uk.
Our other services include:
Asbestos Surveys, Workplace Noise, Thermal, Display Energy Certificates, Environmental Noise, BREEAM Credit Reports, DSM / Thermal Modelling, Commercial EPCs, SBEM Calculations (BER/TER), Acoustic Testing, Commercial Air Testing, Fire Risk Assessment, Room Integrity Testing, Part E / BB93, Sustainability Statements,
Air Integrity Testing can also be known as:
Air Pressure Testing, Air Leakage Testing, Commercial Air Testing, Commercial Air Leakage Testing, Commercial House Leakage Testing, Commercial Air Tightness Testing, Commercial Air Pressure Testing, Fan Pressure Testing, Commercial Air Integrity Testing, Air Tightness Testing, House Leakage Testing, Air Testing, Commercial Fan Pressure Testing,
Copyright 2019 E2 Specialist Consultants Limited
Company No. 06728970