The reverberation time of a room is defined as the time it takes for sound to decay by 60 dB after an abrupt termination...more
How loud is too loud?
Noise above 85 dBA over time will cause hearing loss. In general, the louder the noise, the less time required before hearing loss...more
Portsoy - DSM Thermal Modelling - 0141 894 0107
The office that covers this area is: Glasgow
DSM & Thermal Modelling
What is Dynamic Simulation Modelling in place
Both SBEM & Dynamic Simulation Modelling (DSM) are approved methods for achieve compliance through energy assessments, however DSM provides a significantly more accurate and complex assessment. In the majority of cases DSM offers the design team significant benefits.
This service is similar to SBEM, Dynamic Simulation Modelling provides a calculation of the predicted energy consumed within a commercial building, through the modelling of the building’s features.
The process involves taking designs and building specifications for a project, representing them in a 3D software model and running a simulation over a period of time to provide detailed results. Dynamic Simulation Modelling use historical weather information and accurate sun path analysis to run calculations at multiple stages of the year.
DSM allows for accurate investigation of the following areas:
- Life Cycle Cost Analysis
- Dynamic Thermal Modelling, Simulation & Calculation
- Sun Cast and Solar Shading Analysis
- HVAC Systems Simulation and Selection
- Multi Zone Air Movement Simulation
- Daylight Analysis
- Natural and Electric Lighting Simulation
- iSBEMs (A more accurate way of assessing part L2a & L2b compliance)
When used early in the design processes, calculations of predicted energy consumption through the modelling a building’s specifications can help in improving a buildings design and performance with the potential for reducing both development and operational costs. At later stages this way of modelling can be used in the testing, fine-tuning and implementation of design features, pushing them to their full potential.
E2 Consultants employ fully accredited Low Carbon Consultant with CIBSE and is qualified to Level 5. Please call us to discuss IES software and how it can enable you to design your building smarter, analyse sunpaths and natural ventilation options and minimise energy demand and CO2 emissions.
Our DSM quotes in Portsoy can include:
- Design Stage and As built Stage DSM Part L/F Compliant Calculations and BRUKL Report
- Draft Energy Certificates
- Energy Performance Certificate (EPC) / Building Energy Rating (BER)
- BREEAM Assessment*
This means we can provide you with Level 5 EPCs, BRUKLs and Thermal Modelling as well as calculating CIBSE loads and reporting extensively on building performance.
The use of Dynamic Simulation Modelling can be used to help gain additional BREEAM credits for the following categories:
- Glare Control
- Thermal Comfort
- Energy & CO2 Emissions
- Low or Zero Carbon Technologies
Our other services include:
Asbestos Surveys, Environmental Noise, Display Energy Certificates, Sustainability Statements, Thermal, BREEAM Credit Reports, SBEM Calculations (BER/TER), Commercial Air Testing, Workplace Noise, Room Integrity Testing, DSM / Thermal Modelling, Fire Risk Assessment, Commercial EPCs, Acoustic Testing, Part E / BB93,
Copyright 2019 E2 Specialist Consultants Limited
Company No. 06728970