The Decibel Scale
Gives an approx of human perception of loudness. This is because the human ear has a logarithmic response to changes in sound level...more
How loud is too loud?
Noise above 85 dBA over time will cause hearing loss. In general, the louder the noise, the less time required before hearing loss...more
Southwell - Air Integrity Testing - 0114 368 0192
The office that covers this area is: Sheffield
Southwell Air Integrity Testing Information
At E2 Consultants we provide air tests, air tightness tests and air pressure testing in Southwell and the surrounding areas.
We offer Air Integrity Testing throughout Southwell and surrounding areas. Our experienced Air Integrity Testing assessors will also be happy to offer advice on the best ways to gain your target rating. The number of properties to be tested should be in accordance with the following table:
Air Integrity Testing - Southwell
At E2 Consultants we offer Air Integrity Testing throughout Southwell and surrounding areas. Our experienced Air Integrity Testing assessors will also be happy to offer advice on the best ways to gain your target rating.
E2 Consultantsí accredited consultants can help you comply with EPBD Article 9 and the Energy Performance of Buildings Regulations. Our expert consultants will undertake an assessment of the efficiency of your air conditioning system, reviewing sizing / capacity and offering advice on any improvements or alternative solutions. These solutions, if implemented, can in many instances reduce costs and thus pays for the inspection in the first year.
According to Part L1a, an air pressure test needs to be undertaken on 50% of all dwelling types or three units of each type depending on which value is smaller. A block of flats is considered as a separate development and should be treated as such no matter on the number of blocks on the site. Furthermore, the testing should be done on the first batch of each type of dwelling to be completed. The need to test multiple versions of each type is to confirm the design and construction procedures are up to code according to Government regulations.
The dwellings that make up the test sample are to be chosen by the Building Control Body (BCB) as well as the pressure tester. When selecting the dwellings it should be taken into account that half of the tests for each type should be scheduled during construction of the first 25% of that type. All results, including failures, should be reported back to the BCB. Undertaking the test early in the project means any adjustments can be made before the majority of construction is complete.
|Leakage Rates (m3/hr at 50Pa)|
Air Integrity Testing is sometimes referred to as an Air Pressure Test, Envelope Test or an Air Permeability Test.
It is a requirement under the Building Regulations 2015 Part L that new dwellings in Southwell must pass an Air Integrity Testing prior to occupation; this test certificate must be produced for the dwelling to be signed off by local Southwell building control.
The report has all the details required by the regulations to indicate that a valid test has been performed.
To carry out such a test with accurate results, we require some general requirements to be made available at the time of the test:
1. SAP Design air pressure test figure
2. Electricity supply
3. Water supply to enable traps to be filled./p>
We will seal all of the intentional leakage areas in the house prior to testing. These include: fireplaces, extractor fans, exhaust fans, trickle vents and the odd uninstalled component. Everything else will have to stay 'as is' in the property.
It's strongly suggested that if you've never had a test before, that you review our air pressure / tightness pre-test checklist below.
For a quote or for more information, call our Southwell air tightness / pressure testing consultant on 0114 368 0192 or email email@example.com
For further Air Integrity Testing information for your area, be sure to check out Air-Testing-Sheffield.co.uk.
Our other services include:
SBEM Calculations (BER/TER), Asbestos Surveys, Thermal, Display Energy Certificates, DSM / Thermal Modelling, Part E / BB93, Sustainability Statements, BREEAM Credit Reports, Acoustic Testing, Environmental Noise, Room Integrity Testing, Workplace Noise, Commercial Air Testing, Fire Risk Assessment, Commercial EPCs,
Air Integrity Testing can also be known as:
Commercial Air Tightness Testing, Air Tightness Testing, Commercial Air Integrity Testing, House Leakage Testing, Air Testing, Air Pressure Testing, Commercial Air Leakage Testing, Air Leakage Testing, Fan Pressure Testing, Commercial Air Pressure Testing, Commercial Fan Pressure Testing, Commercial House Leakage Testing, Commercial Air Testing,
Copyright 2020 E2 Specialist Consultants Limited
Company No. 06728970