How loud is too loud?
Noise above 85 dBA over time will cause hearing loss. In general, the louder the noise, the less time required before hearing loss...more
Paths can be interrupted by insulation and blocking air paths. A material's insulation is governed by mass, stiffening and damping...more
Shepperton - Commercial Reverberation Sound Testing - 020 3390 0301
The office that covers this area is: London
At E2 Consultants in Shepperton we offer nationwide acoustic consultancy, which involves comprehensive services across all aspects of noise measurement, assessment and control.
E2 Consultants have Commercial Reverberation Sound Testing consultants in Shepperton specialising in the provision of high quality and practical acoustic consultancy to both the public and private sectors; typically working with residential and commercial developers, architects, planning consultants, industry professionals, local planning authorities and environmental services.
E2 Consultants' Commercial Reverberation Sound Testing consultants in Shepperton have been involved in building and architectural projects at all stages of development, from the specification of the external building envelope and internal separating elements, through to pre-completion testing. Our expert advice has been sought after for different types of new build, refurbished and converted developments including residential, commercial, entertainment, leisure and hotels in addition to a wide variety of mixed-use developments.
We actively encourage clients in Shepperton to seek our services at the earliest opportunity since the integration of acoustic issues into the overall design of a development should remove the need for costly revisions.
We believe that our Commercial Reverberation Sound Testing service delivery across the UK is second to none and that clients retain our expert services because of our continuous commitment to providing high quality and cost-effective advice. For a quote or more information, call one of our UK consultants in Shepperton on 020 3390 0301 or email email@example.com.
In July 2003, the new Approved Document E 'Resistance to the Passage of Sound' (ADE 2003) of the Building Regulations came into force. This requires that new residential properties and rooms for residential purposes be tested (known as pre-completion testing) to demonstrate compliance with the explicit sound insulation performance requirements of ADE 2003.
Guidance in ADE 2003 on pre-completion testing indicates that tests should be carried out at a rate of one set of tests of each construction sub-group completed, whatever the size of the development and thereafter at least one set of tests every ten completions (assuming no failures).
The onus is on the developer to perform pre-completion testing before the property can be 'released to market' and it is now an offence not to perform pre-completion testing.
We often advise property developers, contractors, housing associations and local authorities on the implications of ADE 2003.
Advice is given on the materials and construction details for separating floors and walls and the key interfaces with other building elements.
We offer advice on the additional requirements of ADE 2003 including the control of reverberation in common areas and the performance of internal walls and floors. We are also advising a number of clients on the practical application of RSDs as in some instances the option for construction are potentially reduced and construction costs may be significantly higher than those of a non-RSD structure.
Pre-Completion Testing - The following table outlines the sets of tests that are required for new and converted properties.
|Property Types||Test Requirements|
Dwelling-houses (including bungalows)
One set of tests would normally comprise of two individual Sound Insulation Tests (SITs) and two airborne tests:
Flats with separating floor but not walls
One set of tests should normally comprise of four individual SITs (2 x airborne, 2 x impact):
1. Living room (airborne),
Flats with separating floor and walls
One set of tests should comprise of six individual SITs (4 x airborne, 2 x impact):
1. living room/living room (floor, airborne),
Rooms for Residential Purposes
To conduct a set of tests, the sound insulation between the main rooms should be measured according to the principals set out above for new buildings and material change of use, but adapting them to suit the circumstances.
For further Commercial Reverberation Sound Testing information for your area, be sure to check out Sound-Testing-London.co.uk.
Our other services include:
Part E / BB93, Acoustic Testing, SBEM Calculations (BER/TER), Display Energy Certificates, Environmental Noise, Fire Risk Assessment, Workplace Noise, DSM / Thermal Modelling, Sustainability Statements, Commercial EPCs, Asbestos Surveys, BREEAM Credit Reports, Room Integrity Testing, Thermal, Commercial Air Testing,
Commercial Reverberation Sound Testing can also be known as:
Party Floor Sound Testing, Commercial Sound Testing, Commercial BB93 Acoustic Design of Schools, Commercial Party Floor Sound Testing, Party Floor Sound Insulation Testing, Commercial Sound Insulation Testing, Sound Testing, Commercial Party Floor Sound Insulation Testing, Acoustic Insulation Testing, Commercial Sound Testing Rooms for Residential Purposes, Sound Testing Rooms for Residential Purposes, Commercial Sound Testing HMO, Sound Testing HMO, Reverberation Sound Testing, Sound Testing Schools, Commercial Party Wall Sound Testing, Commercial Sound Testing Hotel, Commercial Party Wall Sound Insulation Testing, Commercial Sound Testing Schools, Sound Testing Hotel, Sound Insulation Testing, Commercial Acoustic Insulation Testing, Party Wall Sound Testing,
Copyright 2019 E2 Specialist Consultants Limited
Company No. 06728970