Offices Nationwide
Sound Insulation
Two parameters describe sound insulation; Dw and Rw. Dw is the insulation between rooms. Rw is the lab-tested insulation of a wall/floor...more
Air Testing & Leakage
Our engineers use Thermal camera and extensive knowledge of buildings to help find leakage areas within the building and can advice of these.
It is the law to provide an Energy Performance Certificate for all new and newly built homes.
Tyne and Wear - Commercial Part E Sound Testing - 0191 633 0103
The office that covers this area is: Newcastle
The towns & cities that are covered within this county are:
Birtley, Blaydon, Boldon, Camperdown, Dudley, Gateshead, Gosforth, Hebburn, Houghton le Spring, Jarrow, Kingston Park, Newcastle upon Tyne, Ponteland, Ryton, South Shields, Sunderland, Tyne, Tynemouth, Wallsend, Washington, Whickham, Whitley Bay,
Phone Number: 0191 633 0103 Email: tyne-and-wear@e2consultants.co.uk
E2 Consultants delivers Sound Insulation Testing for new or refurbished dwellings in compliance with Part E of the Building Regulation in Tyne and Wear and nationwide.
We actively encourage clients to seek our services at the earliest opportunity as it is possible that the noise mitigation measures required in some instances, could dictate significant changes to external and internal layouts. Therefore our early involvement could remove the need for costly revisions.
As part of our service in Tyne and Wear we can also offer advice on the additional requirements of Approved Document Part E including the control of reverberation in common areas and the performance of internal walls and floors.
E2 Consultants in Tyne and Wear are specialists in the provision of high quality and practical acoustic consultancy to both the public and private sectors; typically working with residential and commercial developers, architects, planning consultants, industry, local planning authorities and environmental services.
Our consultants at Tyne and Wear can guide you through the process to ensure the best possible chance of achieving sound test passes. Call 0191 633 0103 or email tyne-and-wear@e2consultants.co.uk
Pre-Completion Testing
The following table outlines the sets of tests that are required for new and converted properties.
| Property Types | Test Requirements |
Dwelling-houses Including bungalows |
Normally, one set of tests should comprise of two individual Sound Insulation Tests (SITs)(two airborne tests):1. Living room (wall) And 2.Bedroom (wall) |
Flats with separating floor but not walls |
Normally, one set of tests should comprise of four individual SITs (2 x airborn, 2 x impact): 1. Living room (Airborn), 2.Living room (Impact), 3. Bedroom (airborn) and 4. Bedroom (Impact) |
Flats with separating floor and walls |
Normally, one set of tests should comprise of six individual SITs (4 x airborne, 2 x impact): 1. living room/living room (floor, airborne), 2. living room/living room (floor, impact), 3. bedroom/bedroom (floor, airborne), 4. bedroom/bedroom (floor, impact), 5. living room/living room (wall, airborne) and 6. bedroom/bedroom (wall, airborne) |
Rooms for Residential Purposes |
To conduct a set of tests, the sound insulation between the main rooms should be measured according to the principals set out above for new buildings and material change of use, but adapting them to suit the circumstances. |
Warning: count(): Parameter must be an array or an object that implements Countable in /data04/elite/public_html/Office.php on line 755
For further Commercial Part E Sound Testing information for your area, be sure to check out Sound-Testing-Newcastle.co.uk.
Our other services include:
Commercial Part E Sound Testing can also be known as:
Part E Testing, Part E Sound Testing, Part E, Commercial Sound Testing Part E, Sound Insulation Design Advice, Part E Sound Insulation Testing, Commercial Part E, Commercial Part E Sound Insulation Testing, Commercial Part E Testing, Sound Testing Part E,
Copyright 2025 E2 Specialist Consultants Limited
Company No. 06728970