Gloucestershire - Code for Sustainable Homes - 029 2193 0147

The office that covers this area is: Cardiff

The towns & cities that are covered within this county are:
Bishop's Cleeve, Blakeney, Bourton on the Water, Bream, Cheltenham, Chipping Campden, Chipping Sodbury, Churchdown, Cinderford, Cirencester, Coldeford, Dursley, Fairford, Gloucester, Lechlade, Lydney, Moreton in Marsh, Nailsworth, Newent, Northleach, Painswick, Patchway, Stanton, Stow-on-the-Wold, Stroud, Tetbury, Tewkesbury, Winchcombe, Winterbourne, Wotton, Wotton under Edge,

Phone Number: 029 2193 0147 Email: gloucestershire@e2consultants.co.uk

A Code for Sustainable Homes - A Code for Sustainable Homes in Gloucestershire

The A Code for Sustainable Homes in Gloucestershire is the environmental assessment method for rating and certifying the performance of new homes; it is also known in Wales as part of the Carbon Reduction Commitment Scheme. In England it was launched in December 2006, by, the Department for Communities and Local Government (CLG and became operational in April 2007 as the new national standard for sustainable design and construction of new homes. Since the 1st of May 2008 the developer of any new home in Gloucestershire a must have a mandatory rating against the Code.

We have made our service as efficient and user friendly as possible. By providing us with the development drawings and details requested on our online C4SH data form, we provide you with your formal C4SH fee proposal.

The UK Government has committed to a reduction in carbon emissions of 80% by the year 2050. Improvement of all the new and existing housing stock in Gloucestershire will be instrumental in achieving this target. The key to achieving these carbon reduction targets, for new and existing dwellings in Gloucestershire is by being more energy efficient. By having a Code Assessment, a level of reduction can be established.

The whole construction and house building industry must start building more sustainable properties in Gloucestershire .To initiate this; the Government has introduced the new national standards for the use in the design and construction of new homes in Gloucestershire . The Code Assessment for Sustainable Homes or the Carbon Reduction Commitment (CRC) is the means of assessment.

It is a compulsory requirement for every new dwelling in England to achieve a rating or score against the Code assessment (C4SH). Information on this rating is to be made available to all potential buyers through a (HIP) Home Information Pack. This indicates whether the home has been built to a specific level of the Code, and if so, which one.

The Code assessment measures the 'whole home' sustainability of a new dwelling in Gloucestershire against the nine categories of sustainable design; this produces a rating of the 'whole home' as a complete package. Each category is then further divided into further components which are individually assessed against a performance target and awarded the relevant credits for achievement.

The CSH covers nine categories of sustainable design:

1. Energy and CO2 emissions (M),
2. Water (M),
3. Materials (M),
4. Surface Water Run-off (M),
5. Waste (M),
6. Pollution,
7. Health and Wellbeing (M),
8. Management,
9. Ecology.

The proposed site, property or development should be registered with the accreditation body via the assessor as early as possible. It is only possible to register developments against the current version of the Code. However sites registered in Gloucestershire under a previous version can be re-registered under the current version of the Technical Guide. The registration is valid for a maximum of 5 years between the expiry of the Technical Guide version and submission of the design stage report.

Code for Sustainable Home Assessments within Gloucestershire can be produced only by an accredited and qualified Code Assessors. A Code assessment usually starts with a pre assessment followed with the Design Stage assessment - where an interim certificate is issued. This is followed by the Post Construction Stage, which includes the final certificate. Evidence is submitted and collected and used to determine the number of credits that can be awarded to the development A summary report is submitted to Code Service Provider via the assessor for the purpose of quality assurance and final certification.

If you require free initial advice, (C4SH) consultancy or a quotation for a Code Assessment in Gloucestershire please call our Gloucestershire consultants at the Gloucestershire Office on 029 2193 0147 or Email gloucestershire@eliteenergy.org.uk

Our other services include:

Code for Sustainable Homes can also be known as:
Code Assessment, C4SH, Code for Sustainable Homes Daylight Calculation, Sustainable Homes, CSH,